private

MyToolExpert Limited

0 Reviews
866429
Marcrist House, Sandall Stones Road
Kirk Sandall Industrial Estate
Doncaster
South Yorkshire
DN3 1QR

Tel:
01904 31****


schedule Closedkeyboard_arrow_down
Mon - Fri: 09:00-17:00
Sat / Sun: Closed

Verification Tests - 13 Nov 2026


done Email address is working
done Website is working
done Email address matches domain
done Phone number checked
done Address checked
done Companies House checked - view
verified_userView Details
Member since : 1 Sep 2026
Manually reviewed : 13 Nov 2026
Last updated : 13 Nov 2026

About MyToolExpert Limited


My Tool Expert supplies diamond tooling and cutting accessories to tradespeople across the UK from our base in Doncaster.

Almost everything we sell is a consumable: the blade, bit or disc that does the actual work and wears out doing it. That makes choosing correctly more important than it sounds. A masonry bit will skate across porcelain without ever biting, a 125mm disc will not fit a 115mm guard, and a raking blade narrower than the joint leaves half the old mortar in the wall. Get it wrong and you have wasted the money and the trip.

So we keep the range tight and tested rather than broad and unchecked. Products are trialled before they join the catalogue and re-checked afterwards, and we would rather talk you into the cheaper item that suits the job than the expensive one that does not.

Orders go out with free UK delivery, and we hold genuine spare parts for the core drilling machines we sell, so a worn switch or motor means a repair rather than a replacement.

Diamond cutting blades and discs.

This is the largest part of our range: blades for angle grinders, floor saws, table saws and petrol cut-off saws, in segmented, continuous rim and turbo rim forms, plus specialist blades for asphalt, engineering brick, reinforced concrete and soft abrasive block.

Two things decide whether a blade is the right one, and neither is price. The first is the material, because a blade built for hard dense concrete will glaze over and stop cutting in soft block, while a soft-bond blade wears away far too quickly in granite. The second is the machine, because bore size and maximum safe speed are not suggestions. Tell us what you are cutting and what you are cutting it with and we will narrow it to one or two blades, rather than sell you a general-purpose disc that does everything adequately and nothing well.

Core drilling and genuine machine spares.

Diamond core bits for wet and dry drilling through concrete, brick, block and stone, in the sizes trades actually need: 52mm and 65mm for soil pipes and vents, 107mm and 127mm for extraction and flue work, and larger diameters to order. We also supply the arbors, adaptors, guide plates, extension bars and pilot drills that go with them.

We stock the Marcrist DDM range of core drilling machines, and just as importantly we hold genuine spare parts for them. Carbon brushes, switches, gearbox parts and water feed components are all available separately, which means a machine that has stopped working is usually a repair costing tens of pounds rather than a replacement costing hundreds. If you tell us the model and describe the fault we will help you work out which part you need.

Tile, porcelain and glass drilling.

Porcelain is the material that catches people out. It is harder than most natural stone, and an ordinary masonry bit will polish the glaze and wander across the surface without ever cutting it. What works is a diamond-tipped bit, kept cool, started at an angle and then brought upright once it has bitten.

We supply dry diamond tile drills, wet diamond bits, glass and mirror drills, and hole saws for larger cut-outs, along with the guides, water cooling attachments and jigs that stop a bit skating across a glazed surface. Sizes run from small bits for shower screen fixings up to the diameters needed for waste pipes and tap holes.

Roof tiles and slate need the same care for a different reason: they are abrasive rather than hard, and they chip easily if the bit or the pressure is wrong.

Mortar raking, repointing and dust control.

Repointing is one of those jobs where the tool decides how much of the work is grinding and how much is chiselling out by hand. We supply mortar raking discs and blades for angle grinders, tungsten mortar rake bits and raking pins, and complete repointing kits.

The important measurement is the joint. A raking blade thinner than the joint leaves old mortar behind at the edges and makes more work, while one thicker than the joint cuts into the brick or stone itself, which is both damage and a bigger repair. Measure before you buy, and if you are unsure, tell us the joint width and the substrate.

Because cutting old mortar produces silica dust, we also supply dust control attachments and shrouds that connect a grinder to an extractor. On a working site that is not an optional extra, and we would rather sell you the guard alongside the blade than have you find out afterwards.

Delivery is free across the UK, and we are happy to talk a job through before you order.
expand_moreRead More

0 FreeIndex Reviews

Be the first to write a review of MyToolExpert Limited.rate_reviewWrite Review

Other Power Tools Suppliers nearby

 
Disclaimer : FreeIndex makes every effort to ensure the business information provided by MyToolExpert Limited is accurate. FreeIndex is not liable for any products or services provided by the business.
Report a problem with this page


Ltd Company No: 05716323
Made with love in Bristol, UK